 ALIM875XTT: €154.90
Listino Pubblico SETTEMBRE N. 1 del 01.09.2012
|
|
THERMALTAKE ToughPower XT 875W - MODULARE
- Compliance with Intel ATX 12V 2.3 & SSI EPS 12V 2.91 standards.
• - 24/7 @ 50 ℃ : Guaranteed to deliver 875W continuous power.
• - Double-forward switching circuitry: compared with traditional circuitry, double-forward switching circuitry offers low power loss and high reliability.
• - Unparalleled DC to DC converters for 3.3V and 5V outputs to reach high efficiency.
• - High quality Japanese capacitors: ensure superb performance and reliability.
• - 105 ° C (221 ℉ ) s olid state capacitors: great stability at higher operating temperatures, frequencies and currents.
• - 80 PLUS Bronze certified – provide up to 89% effective power conversion to cut-down electric cost.
• - S.P.T. Indicator: PSU status monitor with 3-mode LED ( standby / PG signal / temperature).
• - Fan Delay Cool Technology: allows 14cm fan to continue to operate 15-30 sec after system shuts- down to ensure all components are properly cooled.
• - 12Vin1: single +12V rail design providing up to 72A.
• - Multi-GPU ready: 2 x PCI-E 6+2pin & 2 x PCI-E 6pin for PCI-Express graphic cards.
• - Active Power Factor Correction (PFC) with PF value of 0.95 at full load.
• - Auto switching circuitry for universal AC input from 90-264V.
• - High reliability: MTBF>120,000 hours.
• - DIMENSION: 5.9”(W) x 3.4”(H) x 6.3” (L);150mm(W) x 86mm(H) x 160mm(L)
• - Built-in industry grade protections : Over Current, Over Power, Over Voltage, Under Voltage, and Short- Circuit protection.
• - Safety / EMI Approvals: UL/CUL, FCC, TUV, CE, BSMI, and GOST certified.
GENERAL INFO
Type Intel ATX 12V 2.3 & EPS 12V 2.91
Max. Output Capacity 875W
Peak Output Capacity 975W
Color Black
Dimension ( W / H / D ) 150mm(W) x 86mm(H) x 160mm(L)
PFC (Power Factor Correction) Active PFC
Power Good Signal 100-500 msec
Hold Up Time 15msec (minimum) at 80% of full load at 230Vac input.
Input Current 115Vac / 12A max. 230Vac / 6A max.
Input Frequency Range 47 Hz ~ 63 Hz
AC INPUT Input Voltage 100 VAC- 240 VAC
Operation Temperature 0℃ to +50℃
ENVIRONMENTAL Operating Humidity 20% to 90%,non-condensing
Storage Temperature -20 ℃ to +70 ℃
Storage Humidity 5% to 95%, non-condensing
Cooling System 140mm dual ball bearing Fan:1900 RPM ± 10%
MISCELLANEOUS Efficiency 82% ~85% at full load (typical) and 115Vac input. Up to 89% at 230V Input.
MTBF 120,000 hrs minimum
Safety Approval UL/CUL, FCC, TUV, CE, BSMI, GOST |
|
